Union proud · SBE · Since 201924/7 Emergency Service · 973-317-4157
Call
North Jersey · Bulk Materials

Bulk Materials Delivered in North Jersey

Mulch, topsoil, fill, screener tailings, sand and stone, sold by the cubic yard and delivered by JR Ramco trucking across Passaic, Bergen, Morris, Essex, Hudson and Sussex counties in New Jersey, and Orange, Rockland, Sullivan, Ulster and Delaware counties in New York.

Materials

Mulch, soil, screener tailings, sand and stone

JR Ramco sells bulk landscape and construction materials by the cubic yard and delivers them with its own trucks. Call 973-317-4157 to confirm the material, the quantity and the delivery date.

Mulch

Black, brown and red dyed mulch, blended hardwood, double-ground hardwood bark, hemlock, cedar, and certified playground mulch.

Soil & fill

3/8" screened topsoil, 3/4" screened planting soil, a topsoil and compost blend, and 3/4" screened clean fill for bringing up grades. Screener tailings — the coarse soil and stone left after screening topsoil — for land leveling, raising low ground, and building up pads on farms and other sites. See Agricultural Excavation.

Sand

Concrete sand, white and yellow mason sand, plus bunker sand and dressing sand for golf courses.

Stone

Crushed stone, QP, stone dust, decorative stone and boulders.

Transparency

Sold by the cubic yard. Loaded to the legal limit.

A cubic yard measures volume, not weight, and density varies widely by material. A ton of mulch takes up far more room than a ton of stone. Light material like mulch fills the truck body before the truck gets heavy. Dense material like topsoil, fill and stone reaches the truck's legal weight limit before the body is full, so a load of stone is fewer yards than a load of mulch.

MaterialTypical tri-axle load
Mulch10–28 cubic yards
Topsoil or stone10–21 cubic yards

Actual yards per load vary by material, moisture and the individual truck. Every load is matched to the truck's legal weight limit. New Jersey limits are 22,400 lbs per single axle, 34,000 lbs per tandem axle group and 80,000 lbs gross without a special permit (N.J.S.A. 39:3-84).

Estimating

How much material do you need?

One cubic yard is 27 cubic feet. Length (ft) × width (ft) × depth (in) ÷ 12 ÷ 27 = cubic yards. For example, a 10 ft × 10 ft bed at 3 inches deep is about 0.9 cubic yards.

Delivered by JR Ramco trucking

Materials go out on JR Ramco dump trucks across Passaic, Bergen, Morris, Essex, Hudson and Sussex counties in New Jersey, and Orange, Rockland, Sullivan, Ulster and Delaware counties in New York. Need fill exported, spoils hauled or a truck by the hour?

Hire a Truck →

Contractors and homeowners

Landscapers, contractors, supply yards and homeowners can order by the yard. Tell us the material, the yards, the address and the date.

Request a quote →

FAQ

Bulk materials questions

How many yards fit in a tri-axle dump truck?

It depends on the material. A typical tri-axle load is 10–28 cubic yards of mulch, or 10–21 cubic yards of topsoil or stone. Actual yards per load vary by material, moisture and the individual truck.

Why does a load of stone hold fewer yards than a load of mulch?

Bulk materials are sold by the cubic yard, which measures volume, not weight. Stone and topsoil are dense, so the truck reaches its legal weight limit before the body is full. Mulch is light, so the body fills up first.

How do I figure out how many yards I need?

One cubic yard is 27 cubic feet. Multiply length (ft) by width (ft) by depth (in), divide by 12, then divide by 27. A 10 ft by 10 ft bed at 3 inches deep is about 0.9 cubic yards.

How do I order bulk materials?

Call 973-317-4157 or send a request through the contact page with the material, the number of yards, the delivery address and the date you need it.

Need material delivered?

Call with the material, the yards and the delivery address.

Call 973-317-4157